info

Go

Maintenance Of Cone Construction Waste Crusher

Reading Guide: daily inspection is the necessary condition to ensure the efficient operation of cone Construction Waste Crusher. Good maintenance measures extend the service life of the equipment to a great extent. What should we pay attention to in the use of the cone Construction Waste Crusher? The following 6 aspects can not be ignored.

First: Check The Wear Of The Bevel Gear

Guarantee the normal meshing of conical gear

1.jpg

The normal meshing of a pair of conical gears must be the vertical intersecting of the two gear axis, and the joint circle coincides. But the bevel gear in the process of operation, the gear tooth surface will produce great impact load and sliding friction, at the same time, due to the gap between the cone Construction Waste Crusher eccentric sleeve and the rack bushing is relatively large, so the phenomenon of bevel gear tooth fracture load, wear or shock is common.

The small cone gear is more common than the large cone gear because of the small number of teeth and the thin tooth root. Compared with the large cone gear, this is one of the main reasons for the rapid wear of the cone Construction Waste Crusher gear and the frequent breakage.

Ensure rigid connection transmission

The transmission structure of cone Construction Waste Crusher is rigid connection of asynchronous motor through elastic coupling and transmission shaft. When cone Construction Waste Crusher is mixed into metal or overloaded, it will easily cause the bevel gear to break.

Second: Check The Oil Pump Running And Oil Pressure Regularly

The cone Construction Waste Crusher is lubricated by lean oil circulation and lubricated by lubricating oil station. The lubrication system is mainly composed of low pressure gear pump set, fuel tank assembly, oil filter assembly, cooler, safety valve, valve and pipeline. Ensure the normal oil pressure and the operation of the oil pump.

Third: Check Whether There Is Water, Oil Tank Oil Level And Lubricating Oil Emulsification In Oil

There are the following reasons: the presence of water in the oil, the increase of the oil level in the tank and the emulsification of the lubricating oil.

  • 1, when the water pipe of the cooler is corroded and damaged, and the leakage occurs, the cooling water enters the lubricating oil from the cooler, resulting in the increase of the oil level in the fuel tank and the emulsification of the lubricating oil.
  • 2, the water supply volume of the anti seal device is too large, so that the dustproof water cannot be discharged from the draining tube in time, resulting in the oil inlet, the oil level in the tank increased, and the oil emulsion is emulsified.
  • 3, the backwater pipe is blocked, resulting in the dust water can not be discharged in time, leading to the oil in the water, and the oil level in the tank is increased.

Fourth: Check The Anti Sealing Device Regularly And Check The Discharge

In the process of crushing, the ore produces a large amount of dust. In order to prevent dust from entering the friction surface of the inner moving part of the cone Construction Waste Crusher, a water dustproof device is installed on the spherical bearing bearing support of the Construction Waste Crusher. The water dustproof device is composed of an annular storage tank, an annular drainage channel, a baffle and a dust-proof rubber and a ring. The latter two contacts with the moving cone surface, which blocks the dust and makes it fall into the water tank, and flows out with the overflow water in the storage tank.

2.jpg

When the spherical bearings or spherical bearing on the oil return channel is blocked, will cause the leakage of lubricating oil from the dustproof device, resulting in oil proof device discharge water; if the return pipe is blocked, will cause the leakage of lubricating oil from the water proof device, causing oil discharged from the water to the dustproof device. Check the timing.

Fifth: Ensure Normal Oil Pressure And Oil Temperature

Check whether the oil pipe or filter of the dilute oil lubrication system of the Construction Waste Crusher is blocked, which will cause the oil pressure and the oil temperature to rise. In addition, the oil pressure and oil temperature are also affected when the oil path in the Construction Waste Crusher is blocked.

Sixth: Ensure The Oil Quality Of The Lubricating Oil, Replace Regularly

If the dustproof rubber ring caused by excessive wear, sealing, lubricating oil will cause a lot of dust into the machine body, so that the lubricating oil oil quickly deteriorate, causing poor lubrication, increasing cone gear wear, and even cause the bevel gear broken, moving cone high speed rotating axle, scraping and other accidents, at the same time also shorten the service life of lubricating oil, so to regularly check the oil lubrication, regular replacement.

Ore Milling Equipment
Releated: Ore Milling Equipment

MTW European Trapezium Ore Milling Equipment Market Is Still Facing Serious ChallengesChina includes a certain MTW European Trapezium Ore Milling Equipment R &

Other Case

River Gravel Construction Waste Crusher
River Gravel Construction Waste Crusher

Compared to the traditional gravel processing equipment, a new generation of River Gravel Construction Waste Crusher prominent advantages. River Gravel Construc


LEAVE YOUR MESSAGE
Popular Products
Ore Milling Equipment

MTW European Trapezium Ore Milling Equipment Market Is Still Facing Serious ChallengesChina includes a certain MTW European Trapezium Ore Milling Equipment R &

Portable Crusher Plant

Internet And Track-type Portable Crusher Plant Market Is Facing Major Problems"Internet " collaborative manufacturing is definitely an organic environmental sy

Gold Ore Crusher

Internet And HPT Series Multi-cylinder Hydraulic Gold Ore Crusher Industry Integration From The Key Directions"Internet " collaborative manufacturing and "Prod

Construction Waste Crusher

Intelligent manufacturing may be the next primary reason for the C6X Series Construction Waste Crusher industryStatistically from China C6X Series Construction

Ultrafine Mill

Supply-Side Reform To Hurry In The Pace Of Upgrading Of SCM Series Ultrafine Mill IndustryGovernment work report suggested to advertise SCM Series Ultrafine Mi

Sand Making Machine

2018 VSI6X Series Sand Making Machine Industry Trend Analysis"In 2018, the VSI6X Series Sand Making Machine industry continuously run in a low-level with incre

Raymond Mill

"Three Persisting" Transforming the Transition PeriodGetting into 2017, many interviewed MB5X Pendulous Raymond Mill suppliers demonstrated their confidence


RELATED POSTS

River Gravel Construction Waste Crusher

Compared to the traditional gravel processing equipment, a new generation of River Gravel Construction Waste Crusher prominent advantages. River Gravel Construc